Robust Detail Solutions

RobustDetailsLogo

A simple and reliable route to compliance. The robustdetails® scheme is for separating elements in new build joined houses, bungalows and flats. The alternative to pre-completion sound testing for satisfying Building Regulations. Using the scheme avoids the uncertainties of pre-completion sound testing.

robustdetails® can provide…

  • High levels of compliance with technical standards.
  • A set of details with which the industry is familiar.
  • Cost certainty for the housebuilder.
  • An additional layer of expert scrutiny and monitoring to complement building control.
  • Home occupiers with confidence that separating elements which are built in accordance with Robust Details specifications will meet the required sound insulation standards set out in Building Regulations.

Specification sheets can be downloaded from the links below.

 

E-WM-22

E-WM-22

  • Masonry Party Wall
  • Lightweight Aggregate Blocks or Plasmor ‘Aglite Ultima’ 1050kg/m³
  • Minimum 100mm cavity
E-WM-23

E-WM-23

  • Masonry Party Wall
  • Aircrete Blocks – Standard & Thin Joint
  • Minimum 100mm cavity

E-WM-27

E-WM-27

  • Masonry Party Wall
  • Lightweight Aggregate Blocks
  • Minimum 75mm cavity
V-WM-27

V-WM-27

  • Masonry Party Wall
  • Lightweight Aggregate Blocks
  • Minimum 75mm cavity

E-WT-2

E-WT-2

  • Twin timber frames with sheathing boards
  • Minimum 50mm cavity
V-WT-2

V-WT-2

  • Twin timber frames with sheathing boards
  • Minimum 50mm cavity

E-WT-1

E-WT-1

  • Twin timber frames with partial or no sheathing
  • Minimum 50mm cavity
V-WT-1

V-WT-1

  • Twin timber frames with partial or no sheathing
  • Minimum 50mm cavity