Timber & Rafter Batt 40

Timber & Rafter Batt 40

Timber & Rafter Batt 40

Description

Superglass Timber & Rafter Batt 40 is a lightweight, non-combustible glass mineral wool insulation batt. The flexible batt is supplied at 570mm wide to allow easy installation between common stud spacings and minimum on-site cutting and waste.

Application

Superglass Timber & Rafter Batt 40 is designed to provide thermal and acoustic insulation for timber frame roofs, walls and floors. The batts are self-supporting by friction fitting between timber studs.

Floor Roof Wall

Key Benefits

  • Thermal Performance
    Thermal Performance
    – Provides excellent thermal performance with a thermal conductivity of 0.040W/mK.
  • Fire Performance
    Fire Performance
    – Classified as A1 non-combustible (the highest possible rating).
  • Recycled Content
    Recycled Content
    – Manufactured from up to 84% recycled glass.
  • Environmental
    Environmental
    – BRE Green Guide Rating of A+ and ISO 14001 accredited.
  • Easy To Fit
    Easy To Fit
    – Friction fit between timber studs at 600mm centres.
Product Dimensions and Information
Thickness (mm) Length (m) Width (mm) Batts per pack Pack Area (m²) R-Value (m²K/W) Packs per pallet Code
90 1175 570 18 12.06 2.25 16 3297
100 1175 570 16 10.72 2.50 16 3285*
140 1175 570 12 8.04 3.50 16 3310

Thermal Performance

Thermal conductivity of 0.040W/mK.

Fire Performance

All Superglass products are deemed non-combustible and have a fire classification of A1 – the highest possible rating when tested to BS EN 13501-1 Reaction to Fire.

Environment

  • Manufactured in accordance with ISO 14001:2015 – Environmental Management Systems.
  • Zero Ozone Depletion Potential & zero Global Warming Potential.
  • CFC & HCFC free.
  • Generic BRE Green Guide Rating of A+.

Recycled Content

Manufactured from up to 84% recycled glass which would otherwise go to landfill.

Standards

Manufactured in accordance with:

  • BS EN 13162:2012(+A1:2015) Thermal insulation products for buildings – Factory made mineral wool (MW) products.
  • BS EN 13172:2012 Thermal insulation products – Evaluation of conformity.
  • ISO 9001:2008 – Quality Management Systems (QMS).

Handling & Storage

Supplied compression packed in polythene to provide short term protection. For long term protection, the product must be stored indoors or under a waterproof covering in order to protect against weather damage. Should not be left permanently exposed to the elements.