Timber & Rafter Roll 40

Description

Superglass Timber & Rafter Roll 40 is a medium density, non-combustible glass mineral wool insulation roll. The flexible roll is cut at 2x570mm widths to allow easy installation between common stud spacings and minimum on-site cutting and waste.

Application

Superglass Timber & Rafter Roll 40 is designed to provide thermal and acoustic insulation for timber frame roofs, walls and floors. The rolls are self-supporting by friction fitting between timber studs/joists.

Accreditations and Certifications

Accreditations and Certifications

Application

Floor Roof Wall
Timber & Rafter Roll 40

Key Benefits

Thermal Performance
Thermal Performance
– Provides excellent thermal performance with a thermal conductivity of 0.040W/mK.
Fire Performance
Fire Performance
– Classified as A1 non-combustible (the highest possible rating).
Recycled Content
Recycled Content
– Manufactured from up to 84% recycled glass.
Environmental
Environmental
– BRE Green Guide Rating of A+ and ISO 14001 accredited.
Easy To Fit
Easy To Fit
– Friction fit between timber studs at 600mm centres.
Product Dimensions and Information
Thickness (mm) Length (m) Width (mm) Pack Area (m²) R-Value (m²K/W) Packs per pallet Code
90 10.65 2x570 12.14 2.25 24 3489
140 6.90 2x570 7.87 3.50 24 3488

NBS Specification

Click here to add this product to your NBS Specification

Thermal Performance

Thermal conductivity of 0.040W/mK.

Fire Performance

All Superglass products are deemed non-combustible and have a fire classification of A1 (the highest possible rating) when tested to BS EN 13501-1 Reaction to Fire.

Environment

  • Manufactured in accordance with ISO 14001 – Environmental Management Systems.
  • Zero Ozone Depletion Potential & zero Global Warming Potential.
  • CFC & HCFC free.
  • Generic BRE Green Guide Rating of A+.
  • BRE Global verified Environmental Product Declaration (EPD)

Recycled Content

Manufactured from up to 84% recycled glass which would otherwise go to landfill.

Standards

Manufactured in accordance with:

  • BS EN 13162 Thermal insulation products for buildings – Factory made mineral wool (MW) products.
  • BS EN 13172 Thermal insulation products – Evaluation of conformity.
  • BS EN ISO 9001 Quality Management Systems (QMS).
  • UKCA and CE Marked to BS EN 13162:2012+A1:2015.

Handling & Storage

All Superglass products are easy to handle, cut and install. The products are supplied compression packed in polythene to provide short term protection only. For long term protection, the product must be stored indoors, or under a waterproof covering and off the ground to protect from weather damage. The products should not be left permanently exposed to the elements.